Trace

ZeroTech's premium line, built for distance. Trace centres on first focal plane reticles, so the holds stay true at any magnification.

Precision Built for Distance

ZEROTECH TRACE

Trace is the top of the ZeroTech range, and it is built for one thing: making the call at distance. Long-range hunting, precision rifle competition and technical field work, where the shot is a calculation before it is a reaction.

Trace separates on the reticle. Five patterns are found nowhere else in the ZeroTech range, each matched to a job: measuring, ranging, holding wind, or simply a clean aiming point at distance. Most carry illumination, and every model is sealed to IPX7.

Trace

Explore the Trace Range

Riflescopes

Trace riflescopes are built around the first focal plane. The reticle scales with magnification, so a hold or a ranging mark stays true at 5x and at 30x, which is what makes measuring through the scope practical. The larger models use a 34mm tube for more internal travel.

Image 58

Trace red dots are built for hard use. The H.A.L.O uses an aspherical lens to keep the dot round and the window clean, and the emitter is enclosed against rain, dust and snow.

Image 60

Trace binoculars use an Abbe-Koenig prism, a different design to the rest of the range, and reach 92% light transmission. That is what pulls detail out of shadow at first light.

Image 59

The Trace spotting scope is built for work behind the rifle. A straight body keeps magnification, focus and dioptre in line from a bench or prone. Its OSR reticle sits offset from centre to widen the field, and M-LOK rails carry a rangefinder or wind meter.

Image 61
Image 58
Image 59
Image 61
Image 60

Trace Variants

Explore Other Series

Frequently Asked Questions

These are the common questions about the Trace Series, from what separates the variants to how the optics work together as a setup.

Q1: What is the ZeroTech Trace Series built for?

Trace is built for long-range hunters, precision rifle shooters and anyone who needs more control at distance. It spans riflescopes, binoculars, spotting scopes and enclosed red dots, and the emphasis across all four is measuring what you are looking at before you act on it.

Trace Classic is the entry to the line, covering the riflescopes and enclosed red dots. Trace ED adds extra-low dispersion glass, mostly in binoculars. Trace Advanced carries the reticle patterns found nowhere else in the range, and is aimed at competition and long-range hunting.

Enough magnification to judge an animal at distance matters first, and the glass has to hold detail when the light goes. The shot usually presents at the edges of the day, so low-light performance counts as much as reach.

Repeatable tracking comes first. A dialled correction has to move the point of impact by the amount asked, then return to zero. After that they look for a ranging reticle and glass that resolves mirage and impacts.

Binoculars find and judge, the spotting scope calls the correction with its own MRAD reticle, and the riflescope dials it. Because the spotter and the scope speak the same reticle language, a correction can be read out and applied without converting anything.