Vengeance 4-16×44 FFP – RMG MOA

US $513.00

With the wind up and a hold faster than a dial, the ZeroTech Vengeance 4-16×44 keeps every MOA reference in view, scaled to magnification and backed by 80 MOA of elevation.

  • 0.25 MOA Turret Click Value
  • 68 MOA Of Windage Travel
  • 30mm 6061-T6 One Piece Maintube
  • Holds Wind Without Touching The Turret
  • Parallax Focus Down To 10 Metres
FIND A LOCAL DEALER
SKU: VG4164FM Categories: , , Tag:
Description

80 MOA of elevation, 68 MOA of windage. The ZeroTech Vengeance 4-16x44mm FFP RMG MOA moves impact in 0.25 MOA clicks, roughly 7 to 8mm at 100 metres, so a correction can be dialled on the turret or held on the grid.

The RMG MOA grid sits ahead of the erector, so its subtensions grow and shrink with the image and stay true at any power. Its finest lines measure 0.045 MOA thick, so the grid stays fine against a small target at 16x.

A locking dioptre sharpens that grid to your eye, separate from the side focus that sets the target image. The 4-16×44 comes in at 660g. Sealed to IPX7 in a 6061-T6 body, it holds the settings you leave it on, season after season.

Specifications
Focal PlaneFirst (FFP)
Magnification4-16x
Reticle calibrated magnification power (SFP only)–
Objective Lens Diameter44mm
Maintube Diameter30mm
Reticle typeRMG MOA
Zero StopYes
Parallax Adjustment Range10m (11yd) – Infinity
Turret Index Value0.25 MOA
Exit Pupil DiameterLow: 11.0mm; High: 2.7mm
Eye Relief3.58-3.94in (91-100mm)
Diopter AdjustmentLocking
Internal Elevation Adjustment80 MOA
Internal Windage Adjustment68 MOA
Field of View @ 100 MetersLow: 8.8m; High: 2.2m
Field of View @ 100 YardsLow: 26.4ft; High: 6.6ft
Maintube Material6061-T6
Lens CoatingFMC
Available ReticlesLR Hunter Illuminated, RMG, RMG MOA
IlluminationNo
Objective Outer Diameter52mm
Ocular Outer Diameter44mm
Waterproof RatingIPX7
ColorBlack
VariantClassic
Product Weight23.3oz (660g)
Reticles

RMG MOA

Whether holding elevation and windage for high speed, precision shots or dialing your turrets for long range targets, the RMG (Refined Mil Grid) is the perfect blend of precision and speed.

Subtended in 2 MOA increments with integrated ½ MOA measuring bars, the RMG MOA allows shooters to apply elevation and windage holds without having to dial the turrets. A floating center dot ensures a refined point of aim for zeroing and shooting groups, while the heavy bars with chevron ends at 3, 6, 9, and 12 o’clock help draw the shooter’s eye to the center of the reticle at lower magnifications.

Package Includes
  • Magnification Throw Lever
  • ZT pouch with reticle range sheet
  • Hex wrench
  • Neoprene protective scope cover
  • Welcome card with QR code link to instruction manual
FAQs

Q1: What does a 0.25 MOA click move at 100 metres?

A1: Approximately 7 to 8mm. Both turrets index in 0.25 MOA, so a 1 MOA correction is four clicks. Because MOA is an angle rather than a length, that value grows with distance, which is why the figure is always quoted at a stated range.

Q2: Why is there less windage travel than elevation travel?

A2: Elevation carries 80 MOA and windage 68 MOA on this model. Total internal travel comes from the erector assembly inside the 30mm tube. Elevation is the axis you dial for distance, so the larger figure sits where most corrections are made.

Q3: How fine are the lines in the RMG MOA grid?

A3: The finest lines in the pattern measure 0.045 MOA thick. That keeps the grid readable without covering much of a small target, and because the reticle sits in the first focal plane, those lines scale with the image as the power changes.

Q4: Does this model have an illuminated reticle?

A4: No, it is a non-illuminated model, so no battery is fitted or required. The MOA pattern reads on available light, and the locking dioptre sharpens it to your eye. Reticle sharpness comes from the dioptre setting, not from the objective or the parallax dial.

Q5: What rings fit the 30mm maintube?

A5: Any quality 30mm rings and bases, matched exactly to the tube. ZeroTech recommends professional mounting, with the scope sliding freely in the rings and no ring contact at the maintube junctions. A bubble level keeps the reticle square to the rifle.