Trace H.A.L.O Enclosed Reflex Sight 3 MOA (FDE)

US $399.00

28mm of aspherical glass. The Trace H.A.L.O Enclosed Reflex Sight sets a 3 MOA red dot in a sealed window, so rain, dust and gas blow-back stay off the emitter while you track targets with both eyes open.

  • 7075 Aluminium Body With Protective Frame Lip
  • IPX7 Sealing Around An Enclosed Emitter
  • Top-Loading CR2032 Up To 50,000 Hours
  • 28mm Aspherical Fully Multi-Coated Lens
  • 3 MOA Red Dot, 10 Brightness Levels
FIND A LOCAL DEALER
SKU: TRAE28-FDE Categories: , , Tag:
Description

The window sets this one apart. On the Trace H.A.L.O Enclosed Reflex Sight, a convex aspherical lens spreads 28mm of fully multi-coated glass into an unusually wide horizontal view, with minimal distortion, and the emitter sits sealed behind glass on both sides.

The 3 MOA dot subtends about 9cm at 100m, precise enough for deliberate placement and bold enough to pick up in a hurry. Ten brightness levels span night vision lows to full daylight, and a press of both side buttons locks your setting in place.

A top-loading CR2032 swaps without pulling the optic off the host, so zero stays put, and up to 50,000 hours plus motion wake keep the dot live between range days. On the Shield RMSc footprint with the included Picatinny adapter, the Trace H.A.L.O sits ready for offset work, close range hunting or a target pistol.

Specifications
Magnification1x
FootprintShield RMSc with Additional Picatinny Rail Mount
Objective Lens Diameter28mm
Reticle type3 MOA Red Dot
Brightness Settings10
ControlsDigital with auto on/off
Auto Sleep/ Auto ONYes
IlluminationRed
Illumination FunctionDigital
BatteryCR2032
Battery LifeMax 50000 Hours
Turret Index Value1.5 MOA
Windage/Elevation Adjustment80 MOA
Material7075 Aluminum
Eye ReliefUnlimited
Field Of ViewUnlimited
Lens CoatingFMC
Operational Temperature-20°C to 70°C (-4°F to 158°F)
Parallax Adjustment RangeNA
ColorFDE
Available Reticles3 MOA Red Dot
Mount TypeLow
Waterproof RatingIPX7
Product Weight2.75oz (78g)
Reticles

3 MOA RED DOT

3 MOA Red Dot reticle has ten brightness settings, including options for night vision, ensuring clear visibility in various lighting scenarios.

Media
  • Video
Package Includes
  • TRAE28-FDE Heavy-duty Aspherical Lens Optic (H.A.L.O)
  • Protective rubber slip on storage cover
  • Picatinny rail adapter (fitted)
  • Torx wrench and sight adjustment tool
  • High quality microfibre lens cloth
  • Welcome card with QR code link to product manual
FAQs

Q1: What is the housing made from and how sealed is it?

A1: The housing is 7075 aluminium in an anodised FDE finish, weighing 78g. Because the emitter is enclosed, the window is sealed on both sides, so rain, dust and debris cannot reach the LED, and the sight is IPX7 rated.

Q2: Can this sight be used for target pistol shooting?

A2: Yes. ZeroTech lists pistol among its recommended uses, alongside close range bush and scrub hunting and offset or co-witness rifle setups. The Shield RMSc footprint mates to a cut slide or plate, and the wide window and 3 MOA dot favour fast transitions between targets on a stage.

Q3: How do you stop the brightness setting changing by accident?

A3: The two side buttons can be locked. Pressing both together locks the current level and pressing both again releases it, so a knock or a snag leaves the dot exactly where you set it. Holding either button for about three seconds shuts the sight down.

Q4: Will this sight work behind night vision?

A4: Yes. Two of the ten brightness levels are night vision compatible, sitting well below the daylight range so the dot does not bloom through a tube. The remaining eight cover low light through to full midday sun, and the sight resumes the last level you used.

Q5: How should the lens and housing be looked after?

A5: Lift grit off dry with the supplied microfibre cloth before wiping, so nothing is dragged across the coatings. The rubber slip-on cover protects the glass in storage and transit. The housing is IPX7 rated, so rain and washdown are fine, and a dry cloth finishes the job.