Trace Advanced 20-60×80 ED – OSR (Straight)

US $2,499.00

With a shot landing short of the plate, the Trace Advanced 20-60×80 reads the correction on a glass etched OSR reticle, first focal plane and indexed in MRAD, so the value holds at any power.

  • 0.2 MRAD Indexed OSR Reticle
  • 30mm Eye Relief Behind Oversized Eyepiece
  • 38.4m Field At 1000 Metres
  • Carries A Rangefinder Or Red Dot
  • Ranges Known Size Targets In MRAD
FIND A LOCAL DEALER
SKU: TR206080F Categories: , , Tag:
Description

The Trace Advanced 20-60x80mm ED is a straight body spotter for work behind the rifle. An 80mm ED objective and a 38.4m field at 1000 metres find the target, and 30mm of eye relief behind an oversized eyepiece holds a generous eye box.

Glass etched in the first focal plane, the OSR sits offset from centre so more of the field stays clear. Elevation and windage carry 0.2 MRAD indexing with 0.1 MRAD measuring bars, so a correction reads in MRAD and goes straight to the shooter. Being first focal plane, those values hold at 20x and at 60x.

The base is threaded for a conventional QD plate, and an optional Magpul MOE 5-slot rail at 6 o’clock bolts the 2377g body rigidly to a Picatinny head. ARCA Swiss adapters fit as well. Pop-off covers on the 3, 9 and 12 o’clock M-LOK rails reveal mounts for a wind meter, a rangefinder or a red dot.

The straight body runs magnification, focus and dioptre in line, a layout many prefer from a vehicle, a bench or standing, while an angled spotter answers a different preference on long uphill glassing. Sealed to IPX7 and focusing from 10 metres to infinity, the 20-60×80 stays ready when the call matters.

Specifications
Magnification20-60x
Objective Lens Diameter80mm
Prism Type–
Exit Pupil DiameterLow: 4mm; High: 1.3mm
Eye Relief30mm
Field of View @ 1000 MetresLow: 38.4m; High: 12.6m
WaterproofYes IPX7
Parallax Adjustment Range10m (11yd) – Infinity
Tripod Compatibility–
Optical GlassED
Gas Fill–
VariantED
Product Weight83.8oz (2377g)
Package Includes
  • Neoprene Protective Cover
  • Welcome card/ instruction manual QR code link
  • High quality ZT lens cloth
  • OSR Reticle dimensions chart
  • 6 O’ clock MOE rail mounting bolts and hex key
  • High Quality Microfibre Cloth
FAQs

Q1: How does a first focal plane reticle stay accurate at every power?

A1: Its subtensions scale with the image. Because the OSR sits in the first focal plane, 0.2 MRAD stays 0.2 MRAD whether the zoom is at 20x or at 60x, so a correction read at one power is still right at another.

Q2: How do you set the dioptre on a spotting scope?

A2: Run the magnification to maximum and the focus out to its far position, then look briefly at a blank bright surface such as clear sky and twist the dioptre until the reticle is sharp. About 1.75 turns are available. Note the final position for reference.

Q3: Can a spotting scope range a target?

A3: This one can, against a target of known size. The OSR carries 0.2 MRAD indexing with 0.1 MRAD measuring bars on both the elevation and windage axes, so measuring a known dimension in MRAD gives the distance, and the same bars read shot corrections.

Q4: How does this spotting scope mount to a shooting tripod?

A4: Three ways. The threaded base takes a conventional QD plate with an anti-rotate index pin hole, an optional Magpul MOE 5-slot rail bolts to the 6 o’clock position for a rigid Picatinny attachment, and an ARCA Swiss adapter plate fits heads cut for that dovetail.

Q5: What does an IPX7 rating mean in the field?

A5: IPX7 covers immersion in one metre of water for 30 minutes. On this spotter that sealing sits under rubber armour, so rain, spray and a dunked tripod leg are all inside its brief. ZeroTech publishes no gas fill for this model.