Trace 4.5-27×50 FFP – RMG MOA
US $1,199.00
Every hold on the glass-etched RMG MOA grid grows and shrinks with magnification, because the Trace 4.5-27×50 sets it in the first focal plane, where it reads true from 4.5x to 27x. Same holds, every power.
- One-Piece 30mm Maintube Construction
- IPX7 Water Resistance Rating
- Weathershield Coatings On Exterior Lens Surfaces
- Heavy Duty Alloy Flip-Up Lens Covers
- Locking Dioptre Holds Reticle Focus
The ZeroTech Trace 4.5-27x50mm FFP RMG MOA runs a floating centre dot inside a milling grid whose finest lines are drawn at 0.045 MOA thick, with heavy chevron-tipped bars entering from the 3, 6, 9 and 12 o’clock positions to pull your eye to centre at low power. Glass etching keeps that pattern intact under recoil.
Locking turrets index in 0.25 MOA with 60 MOA of elevation and 60 MOA of windage on an 825g 6061-T6 body, and elevation stops on your zero and goes no further. Parallax reaches down to 25 metres, the exit pupil measures 9.5mm at 4.5x, and a 4.5-27×50 set up this way stays ready when you pick it up.
| Focal Plane | First (FFP) |
|---|---|
| Magnification | 4.5-27x |
| Reticle calibrated magnification power (SFP only) | – |
| Objective Lens Diameter | 50mm |
| Maintube Diameter | 30mm |
| Reticle type | RMG MOA |
| Zero Stop | Yes |
| Parallax Adjustment Range | 25m (27yd) – Infinity |
| Turret Index Value | 0.25 MOA |
| Exit Pupil Diameter | Low: 9.5mm; High: 1.9mm |
| Eye Relief | 3.58-3.94in (91-100mm) |
| Diopter Adjustment | Locking |
| Internal Elevation Adjustment | 60 MOA |
| Internal Windage Adjustment | 60 MOA |
| Field of View @ 100 Meters | Low: 7.4m; High: 1.3m |
| Field of View @ 100 Yards | Low: 22.2ft; High: 3.9ft |
| Maintube Material | 6061-T6 |
| Lens Coating | FMC |
| Available Reticles | RMG, RMG MOA |
| Illumination | No |
| Recommended Use | Big Game Hunting – Backcountry, Long Range Shooting / Precision Shooting, Rimfire / Plinking |
| Objective Outer Diameter | 57.5mm |
| Ocular Outer Diameter | 43.5mm |
| Waterproof Rating | IPX7 |
| Color | Black |
| Variant | Classic |
| Product Weight | 29.1oz (824g) |

RMG MOA
Whether holding elevation and windage for high speed, precision shots or dialing your turrets for long range targets, the RMG (Refined Mil Grid) is the perfect blend of precision and speed.
Subtended in 2 MOA increments with integrated ½ MOA measuring bars, the RMG MOA allows shooters to apply elevation and windage holds without having to dial the turrets. A floating center dot ensures a refined point of aim for zeroing and shooting groups, while the heavy bars with chevron ends at 3, 6, 9, and 12 o’clock help draw the shooter’s eye to the center of the reticle at lower magnifications.
- Heavy Duty Alloy Flip-Up Covers
- Locking Ring Tool For HD Flip-Up Covers
- Turret Allen Key
- 3 Spare Turret Grub Screws
- Instruction Manual
- Reticle Range Chart
- High Quality Microfibre Cloth
Q1: What is the RMG MOA grid made up of?
A1: It is a milling grid built around a floating centre dot, calibrated in minutes of angle, carrying measuring references for elevation and windage holds. Heavy bars with chevron ends enter from four sides, and the finest lines in the grid are drawn at 0.045 MOA thick.
Q2: How is the zero stop set on this scope?
A2: With 2mm hex grub screws on an orange zero-stop ring under the elevation dial. Once set, elevation stops on your zero and goes no further, so a wind-down after dialling lands there without counting rotations. The windage turret re-indexes through three 2mm grub screws.
Q3: Is this riflescope sealed against rain and dust?
A3: It holds an IPX7 rating, which means submersion to one metre for 30 minutes. The outer lens surfaces carry Weathershield coatings that repel water and dust, and the one-piece 30mm 6061-T6 maintube keeps the internals closed up through sustained weather.
Q4: Why does the reticle look larger at 27x?
A4: Because it is a first focal plane pattern, so it scales with the image. At the top of the range the grid appears larger, which is exactly what keeps every hold measuring the same angle. At 4.5x it appears finer, which is why the heavy outer bars are there to guide the eye.
Q5: How should the lenses be cleaned on this scope?
A5: Loose grit is lifted off first, then the supplied microfibre cloth handles the glass. The Weathershield coatings on the exterior surfaces shed water and dust, so most marks come away without solvent. Alloy flip-up covers protect the lenses between sessions.

















