Thrive HD 6-24×50 – PHR 2
US $549.00
70 MOA of internal elevation. The Thrive HD 6-24×50 turns that travel into reach, with a glass-etched PHR 2 reticle whose holdover stadia sit true at 24x for measured long-range and rimfire work.
- Holdover Stadia From 1.1 MOA
- Elevation Holds Out To 25 MOA
- Floating Centre Dot For Fine Aiming
- Finer Post Below Centre Dot
- Glass-Etched Pattern Calibrated At 24x
24x is where this optic works hardest. The field narrows to 1.5m at 100 metres, small enough to read fine detail on a distant mark, and the glass-etched PHR 2 reticle holds its holdover stadia true at exactly that power. Below it, 6x opens the picture back out.
The Thrive HD 6-24x50mm carries 70 MOA of elevation and 70 MOA of windage in 0.25 MOA clicks under capped turrets, so a zero set for centrefire stays put while the same optic drops onto a rimfire for plinking at short range.
Side parallax pulls the image sharp from 10 metres out to infinity, and HD glass with 92% light transmission holds contrast as the sun drops. A 6-24×50 like this stretches from range day to first light, season after season.
| Focal Plane | Second (SFP) |
|---|---|
| Magnification | 6-24x |
| Reticle calibrated magnification power (SFP only) | 24x |
| Objective Lens Diameter | 50mm |
| Maintube Diameter | 30mm |
| Reticle type | PHR 2 |
| Zero Stop | No |
| Parallax Adjustment Range | 10m (11yd) – Infinity |
| Turret Index Value | 0.25 MOA |
| Exit Pupil Diameter | Low: 8.3mm; High: 2.08mm |
| Eye Relief | 3.74in (95mm) |
| Diopter Adjustment | Locking |
| Internal Elevation Adjustment | 70 MOA |
| Internal Windage Adjustment | 70 MOA |
| Field of View @ 100 Meters | Low: 5.9m; High: 1.5m |
| Field of View @ 100 Yards | Low: 17.7ft; High: 4.5ft |
| Maintube Material | 6061-T6 |
| Lens Coating | FMC |
| Available Reticles | LR Hunter Illuminated, PHR 2, PHR 2 Illuminated |
| Illumination | No |
| Recommended Use | Big Game Hunting – Backcountry, Long Range Shooting / Precision Shooting, Rimfire / Plinking |
| Objective Outer Diameter | 57.5mm |
| Ocular Outer Diameter | 43.5mm |
| Waterproof Rating | IPX7 |
| Color | Black |
| Variant | HD |
| Product Weight | 25.9oz (734g) |
- Heavy Duty Alloy Flip-Up Covers
- Locking Ring Tool For HD Flip-Up Covers
- Instruction Manual
- Reticle Range Chart
- High Quality Microfibre Cloth
Q1: Why are the holdover values only true at 24x?
A1: Because the PHR 2 sits in the second focal plane, so it keeps one apparent size while the image scales. The Thrive HD 6-24×50 is calibrated at 24x, and the stadia at 1.1 through 25 MOA read true only at that power.
Q2: Is this scope suitable for rimfire and plinking?
A2: Yes, ZeroTech lists rimfire and plinking among its recommended uses. Side parallax focuses from 10 metres, and 24x resolves small marks at short range. ZeroTech commonly zeroes rimfire hunting rifles at 50 to 75 metres depending on the ammunition.
Q3: How much adjustment is available for long-range dialling?
A3: The elevation turret offers 70 MOA of internal travel and windage the same, in 0.25 MOA clicks worth roughly 7 to 8mm at 100 metres. The turrets are capped, so they stay put in a pack and can be re-indexed to zero with the multi-tool.
Q4: What tube diameter do the mounts need to match?
A4: A 30mm tube, so 30mm rings are required, and the maintube is machined 6061-T6 aluminium. ZeroTech advises having the scope professionally fitted, with ring tops tightened to 2.5 to 2.8 NM, no contact between the scope and the barrel or receiver, and a bubble level for reticle alignment.
Q5: How well sealed is this scope against water?
A5: It carries an IPX7 rating, so 30 minutes at a depth of 1 metre does it no harm, and Weathershield exterior lens coatings resist scratching. The 6061-T6 maintube and HD alloy flip-up covers handle the rest of the knocks in transport.


















