FAQ
Parallax in riflescopes is the apparent movement of the reticle against the target when your eye moves off the centreline of the scope. ZeroTech scopes are built to minimise parallax error, so the reticle stays on the target when your head shifts behind the scope.
A riflescope is made up of the objective lens, the eyepiece, the reticle, the turrets and the maintube. Each one affects clarity, durability and how well the scope holds zero.
The 3-9x40mm specification means variable magnification from 3x to 9x with a 40mm objective lens. It is a versatile choice for general hunting and range use. ZeroTech offers the 3-9x40 with a choice of reticles — see the Reticles page for the current options.
First, make sure the rifle is clear and does not contain any live ammunition.
Secure the rifle, place the scope in the mounting rings, and use a scope levelling tool or a bubble level to get it horizontal before tightening. We recommend following the scope ring manufacturer's torque settings for best fitment.
First, make sure the rifle is clear and does not contain any live ammunition.
Secure your rifle. Place it in a stable gun vise or similar setup where it is held without movement, oriented so you can see both the scope and the bore.
Hang the plumb bob. Find a point directly in front of the rifle — a tripod, a ceiling hook, or any overhead fixing. Hang the plumb bob so the weight swings free of the ground and anything else, then let it settle. That gives you a true vertical reference.
Align the rifle. Look through the bore, or use the rifle's sights, to line the rifle up with the plumb bob string. The string should appear vertical and centred. Tighten the vise to hold that position.
Level the scope. Look through the scope and compare the vertical crosshair with the plumb bob string. The two should be parallel. Adjust the scope's orientation until they are, then tighten the scope rings.
Double-check. Look through the scope again and confirm the vertical crosshair still lines up. If it has moved, repeat the process.
Finish. Once both rifle and scope are vertical and aligned, remove the rifle from the vise and move on to sighting in.
A plumb bob is a simple and effective way to get the rifle and scope square to each other, which matters most at longer distances.
As low as the rings allow without the scope touching the barrel or the rifle, while still giving you a comfortable cheek weld and a clear sight picture.
It is not essential, but a level helps you keep the reticle square to the rifle. That matters most at long range, where a canted scope moves the point of impact.
It depends on the glass and the conditions, but a 3-9x40 will generally give a clear view of targets several hundred yards out. The usable range depends on the magnification you are on and the light you have.
Variable magnification from 4x to 16x, with a 50mm objective lens. ZeroTech offers the Thrive 4-16x50 with a choice of reticles - see the Reticles page for the current options.
At 50 yards, 4x to 6x is usually enough. ZeroTech's LPVO options, including the Vengeance 1-6x24, work well for close-range target acquisition.
It depends on the hunting. For big game in open country, 7x to 12x works well. For closer range or dense timber, 3x to 7x is easier to use.
Start with the distances you shoot and the conditions you shoot in. From there, consider the reticle, whether you want illumination, and how the scope will be mounted.
Consider the game you are hunting, the typical shooting distance, the country you hunt in, and your own preference on reticle and magnification.
At 100 yards, 4x to 9x is usually enough.
At 1000 yards, 18x to 25x is the usual range, though experienced shooters often work with less. The Trace and Trace Advanced riflescopes are built for this kind of distance.
Think about the distance you are likely to shoot and the country you are hunting, open field or timber, then choose a scope with a reticle and magnification range that match.
Magnification is how much larger the target appears through the scope compared with the naked eye. At 4x, the target looks four times closer than it does unaided. Every ZeroTech optic comes with a range chart specific to its reticle, which you can fill in with your own data.
As distance increases, more magnification generally helps you identify the target and place the shot precisely.
Fixed and variable magnification riflescopes, reflex sights, low power variable optics (LPVO) and long-range scopes.
A variable magnification scope with clear glass, a reticle that works for the game you hunt, and a build that stands up to being carried.
A magnification range of 3x to 9x or 4x to 12x covers most deer hunting.
At 300 yards, 6x to 12x is usually enough.
At 1000 yards, 18x to 25x or higher is the usual range. The Trace Advanced series is built for long-range work, with the turrets, reticles and glass chosen for shooting at distance.
A 1-6x LPVO is versatile and works from close quarters out to around 400 to 500 yards.
LPVO stands for low power variable optic — a scope whose magnification starts at or near 1x and adjusts upwards, typically to 6x or 8x. ZeroTech offers the Vengeance 1-6x24 LPVO.
A 1-6x scope handles close-quarters work and mid-range target shooting.
On a red dot, prism or scope that will not power up, the most common cause is the battery isolator still being in place. Removing it usually solves it.
Welcome to our FAQ page! At ZeroTech Optics, we’re dedicated not just to crafting superior rifle scopes, but also to empowering our customers with the knowledge they need. Whether you’re curious about our manufacturing origins, the technicalities of parallax, or the best practices for mounting and leveling your scope, we’ve got you covered. Dive into our frequently asked questions below for detailed insights into our products and best practices.
Riflescope Parallax
Parallax in rifle scopes refers to the apparent movement of the reticle in relation to the target when the shooter’s eye moves off the centerline of the scope. ZeroTech scopes are designed to minimize parallax errors, ensuring accurate shots every time.
Riflescope Parts
A rifle scope consists of several parts including the objective lens, eyepiece, reticle, turrets, and tube. Each part plays a crucial role in ensuring clarity, accuracy, and durability. ZeroTech Optics prides itself on producing high-quality rifle scope components that are manufactured to the highest specifications ensuring precision and reliability in every product.
Riflescope 3-9x40mm
The 3-9x40mm specification indicates a variable magnification scope that can adjust from 3x to 9x with an objective lens diameter of 40mm. It’s a versatile choice suitable for various shooting conditions and ZeroTech Optics features the 3-9×40 with both Zeroplex and PHR3 (precision hunting) reticles.
How to mount my rifle scope level?
First, make sure the rifle is clear and doesn’t contain any live ammunition. To mount your rifle scope level, first ensure your rifle is secure. Place the scope on the mounting rings and use a scope leveling tool or a bubble level to ensure it’s perfectly horizontal before tightening. We recommend you follow the scope ring manufacturers torque settings for best fitment.
How do you level a rifle to Mount a scope?
Secure Your Rifle:
Place your rifle in a stable gun vise or a similar setup where it can be held securely without movement. Ensure the rifle is oriented in a way that you can easily view the scope and the bore.
Hang the Plumb Bob:
Find a location directly in front of the rifle where you can hang the plumb bob. This could be a tripod, a ceiling hook, or any other overhead point.
Hang the plumb bob from its string, ensuring that the pointed weight at the bottom is suspended freely without touching the ground or any other objects.
Allow the plumb bob to settle and stop swinging. This will give you a perfectly vertical reference line.
Align the Rifle:
Look through the bore of the rifle (if possible) or use the rifle’s sights to align the rifle with the plumb bob’s string. The string should appear perfectly vertical and centered when viewed through the bore or sights.
Once the rifle is aligned with the plumb bob’s string, tighten the gun vise or your setup to hold the rifle in that position.
Level the Scope:
With the rifle now aligned vertically using the plumb bob, it’s time to level the scope.
Look through the scope and compare the vertical crosshair (reticle) with the plumb bob’s string. The two should be parallel.
If they’re not aligned, make adjustments to the scope’s orientation until the vertical crosshair and the plumb bob’s string are perfectly parallel.
Once aligned, tighten the scope rings to secure the scope in place.
Double-Check:
After tightening everything down, look through the scope again and ensure that the vertical crosshair still aligns with the plumb bob’s string. If there’s any misalignment, you may need to repeat the process.
Finalize:
Once you’re satisfied that both the rifle and scope are perfectly vertical and aligned with the plumb bob, you can remove the rifle from the vise and proceed with any other setup or sighting-in tasks.
Using a plumb bob is a simple yet effective method to ensure your rifle and scope are perfectly level, which is crucial for accurate shooting, especially at longer distances.
What height should I mount my scope?
The scope should be mounted as low as possible without touching the barrel or the rifle, ensuring a comfortable cheek weld and clear sight picture.
Do I need a level on my riflescope?
While not mandatory, having a level on your riflescope can help ensure accuracy, especially in long-range shooting where a tilted (canted) scope can significantly affect bullet impact.
How Far can a 3-9x40 scope see
While the visibility range can vary based on the quality of the optics, a 3-9×40 scope typically allows clear viewing of targets several hundred meters away. The maximum range depends on the magnification used and environmental conditions.
What does 4-16x50 mean on a scope?
This indicates a scope with variable magnification that can adjust from 4x to 16x, and it has an objective lens diameter of 50mm. ZeroTech Optics features the Thrive 4-16×50 with three reticle options, Zeroplex, Mildot & PHR-II making it one of the most versatile optics in the Thrive family of optics.
How much Magnification for 50 meters?
For shooting at 50 meters, 4x to 6x magnification is typically sufficient. ZeroTech’s LPVO options including the Vengeance 1-6×24 are perfect for close range target acquistions.
What is the best magnification for a Hunting rifle scope?
This depends on the type of hunting. For big game in open terrains, 7x to 12x is ideal. For closer range or dense forest hunting, 3x to 7x is more suitable.
How to choose a rifle scope?
Consider your shooting needs (distance, environment), budget, desired features (like reticle type, illumination), and the quality of optics. ZeroTech prides itself in supplying optics to suit every shooting and hunting application.
How to choose a Hunting scope
Consider the game you’re hunting, the typical shooting distance, the environment, and your personal preferences in terms of reticle, magnification, and other features. ZeroTech prides itself in supplying optics to suit every shooting and hunting application.
Scope magnification for 100 yards
For 100 yards, 4x to 9x magnification is typically sufficient.
Scope Magnification for 1000 yards
For shooting at 1000 yards, a magnification of 18x to 25x is recommended, though skilled shooters can use less. We recommend the Trace and Trace Advanced riflescopes for you long range precision shooting needs.
Rifle scope magnification chart
This would be a chart detailing the recommended magnification for various shooting distances and purposes. Each ZeroTech Optic comes with a range chart (DOPE) specific to the riflescope reticle that you can enter your data into.
How to choose a rifle scope for deer hunting?
Consider the typical distance you’ll be shooting, the environment (open field vs. forest), and choose a scope with clear optics, a suitable reticle, and the right magnification range. ZeroTech prides itself in supplying optics to suit every shooting and hunting application.
Rifle Scope magnification explained
Magnification indicates how much larger the target will appear through the scope compared to the naked eye. For instance, 4x magnification means the target will appear four times larger than when viewed without magnification.
Rifle Scope Magnification vs Distance
As distance increases, higher magnification is generally needed for clear target identification and precision shooting. ZeroTech optics has a wide range of optics to suit all shooting distance applications
Types of scopes for rifles
There are various types including fixed and variable magnification scopes, reflex sights, LPVO sights, and long range scopes. ZeroTech Optics has a wide selection of optics to suit your shooting and hunting needs.
What scope is best for hunting?
A variable magnification scope with clear optics, a suitable reticle for hunting, and a durable build is ideal. ZeroTech Optics has a wide selection of optics to suit your shooting and hunting needs.
What is best sized scope for hunting deer?
A scope with a magnification range of 3x to 9x or 4x to 12x is commonly recommended for deer hunting. ZeroTech Optics has a wide selection of optics to suit your shooting and hunting needs.
What kind of scope do I need for 300 Yards?
For 300 yards, a scope with a magnification of 6x to 12x is typically recommended.
What kind of Magnification do I need to shoot 1000 Yards?
For 1000 yards, a magnification of 18x to 25x or higher is recommended. The ZeroTech Optics Trace Advanced series of optics is designed with the long-range shooter in mind, each component of the Trace Advanced riflescope has been specifically designed to give you the best user experience to ensure you can place shot after shot with confidence.
What range is a 1-6 LVPO good for?
A 1-6x LVPO (Low Power Variable Optic) is versatile and suitable for close to mid-range engagements, typically effective from zero to around 400-500 yards.
What is a LVPO Optic?
LVPO stands for Low Power Variable Optic, which offers a magnification range starting at or near 1x and can be adjusted to higher magnifications, typically up to 6x or 8x. ZeroTech Optics features the Vengeance 1-6×24 LPVO.
What is a 1-6 scope good for?
A 1-6x scope is versatile and can be used for close-quarters scenarios as well as mid-range target engagements
WHAT IF OPTIC WON'T TURN ON?
Red dot, prism or scope won’t turn on? Don’t forget to remove the battery isolator.